Hay Rotary Rake

After the pasture is harvested, in order to reach the baling conditions as soon as possible, the pasture needs to be sun-lit with a spreader. The spreader can evenly spread the pasture in the field, which facilitates the rapid evaporation of water and facilitates the cutting of the pasture in the bales or Dry before silage. When the moisture of the pasture can reach a state where hay rotary rake can be dried, the crops are gathered into a barn with a rake and smashed into strips in preparation for tying operations. When the rake is working, use the spring teeth to move the crop gently to gather or spread the sun, avoiding the mixed debris or stones in the crop to improve the quality of pasture or green feed.

Structure

As the hay rotary rake has many functions such as rushing grass, leveling, reversing drying and moving, the hay rotary rake can be used to integrate the clean and regular grazing grasses, and the pastures have a shorter distance to travel, and the number of pastures is reduced, and the loss of grass, and access to a higher nutritional composition, in line with the modern concept of animal husbandry feeding.

Models

At now, there are 3 models available for choice, please kindly check in below:

Operation Method

1. Fully add lubricant to each rotating part before operating;

2. When adjusting, slowly lower the implement to the ground to stop the tractor and stop it. Strict adjustment and maintenance in the boot state;

3. During the operation, the driver should confirm that there is no one or other obstacles within a certain range around before starting the operation;

4. At the end of the work, it is necessary to choose the leveling site so as to ensure safe parking of the implements;

5. During the operation, they shall not make arbitrarily sharp turns, and it is forbidden to raise the implement without rotating the ground.

6. When transporting, take off the rear output gear to ensure that the machine tool stops, the machine tool lifts more than 20 cm away from the ground, and shortens the connecting rod of the grass baffle to facilitate transportation.